DYSON DC04 SPARES

DYSON CLUTCH MODELS DC04.

DYSON HOSE FITS CLUTCH TYPE DCO4 VACUUM CLEANERS, DOES NOT FIT LIME /SILVER MACHINES
NONE GENUINE HOSE

DC04 NONE GENIUNE HOSE FITS NONE CLUTCH MODELS

DC04 CLEANER HEAD ASSY Clutch type please note does not fit Silver Lime

FITS MODELS DC01/04/07/14
STAIR TOOL

CREVICE TOOL FITS MODELS DC01/04/07/14

DUSTING BRUSH FITS MODELS DC01/04/07/14

CREVICE TOOL, DUSTING BRUSH, AND UPHOLSTERY TOOL FITS DCO1/02/03/04/05/07

Mattress tool
Removes dirt and dust mites from mattresses and upholstery.
Wide head and lightweight design for easy cleaning around the home

DYSON BELTS , PACKET OF 2
FITS DCO7, DCO4, NONE CLUTCH MODELS
DC04
SILVER LIME
SINGLE BELT MODELS

more info

DYSON BELTS MADE BY DYSON, PACKET OF 2 FITS DCO7, DCO4, NONE CLUTCH MODELS ( SINGLE BELT MODELS, DOES NOT HAVE A KNOB THAT YOU CAN TURN TO STOP ROLLER GOING ROUND ,IF NOT SURE ABOUT IT EMAIL US WITH IT! ....CHRIS SAME AS BELOW BUT MADE BY DYSON

dco4 belts pkt of 2
To
replace the belts on the dco4 clutch model
1 remove brush roll
2 remove the control knob,
this can be done by pressing down the hidden locating catches ,one is located adjacent, to and inline with the large dot on the control knob, and the pressing can be achieved by inserting a thin screwdriver blade into the
groove next to the dot,this releases the top catch,the other catch can be located directly opposite on the underside,again insert the screwdriver as detailed above, the knob can be completely removed, and now the clutch can be removed and dismantled with standard engineering tools, great care must
be taken to replace all components in order as they came off this will ease re-assembly, good luck, Chris

DYSON DCO4 SOLEPLATE NONE CLUTCH TYPE, IN LAYMAN TERMS, THIS MEANS THAT IT DOES NOT HAVE A LARGE KNOB ON THE SIDE OF THE MACHINE, THAT YOU CAN TURN TO STOP THE ROLLER FROM GOING ROUND.HOPE THIS HELPS

DC04 UPPER FILTER BLUE/WHITE WASHABLE DYSON DC04

HEPA POST MOTOR FILTER.DYSON...@.DC0ABSOLUTE
.DC04PURPLE/LIME.DC04DESTIJL.

DYSON DC04 LOWER FILTER PAD

DYSON WHEELS FITS DCO4 COMES WITH CLIPS

DYSON DC04 MOTOR YDK TYPE
LOWER PRICED ALTERNATIVE

NEXT DAY DELIVERY ON THIS PART[ UK ONLY NEXT DAY]

DCO4 MOTOR.. NEW LOWER PRICED MOTORS
NEXT DAY DELIVERY ON THIS PART

DYSON MOTOR BRUSHES FITS YDK DC04/07/14 TYPE MOTORS BRUSHES( NOTE USE OLD TERMINALS)
7.0 X 10 X 33.0 MM

U BEND FOR DCO7 MODELS

DCO4,CLUTCH ASSY, SEE ALSO CLUTCH KNOB BELOW

DCO4/07 CLUTCH ACTUATOR KNOB, SEE ALSO CLUTCH ASSY ABOVE

DC04 SWITCH KNOB PEOPLE BREAK THIS WHEN TRYING TO REPLACE THE FLEX, { YELLOW ONLY IN STOCK}

DCO4 SWITCH HOUSING, SWITCH ABOVE FITS IN,
A COMMON THING PEOPLE DAMAGE WHEN REWIRING THE FLEX

DCO4 SWITCH ASSEMBLY

DYSON DC04 FLEX ASSEMBLY COMES NOW COMPLETE WITH INSTRUCTIONS
CAN USE FLX81 BELOW .. CHRIS

DYSON SWITCH KNOB REMOVAL TOOL
NOW WITH INSTRUCTONS ON HOW TO USE IT

FLEX ASSY COMES WITH PLUG AND SOLDERED ENDS
GREY AND 8 METERS LONG FITS MOST MAKES
PLEASE NOTE THIS AS PLAIN ENDS, FIT YOUR OWN SPADES TAGS

DYSON CABLE CLIP

DYSON SPADE CONNECTOR BOOT

FITS MOST DYSONS 4.6MM (SINGLE) FITS FLEX MIS106

BRUSH ROLL
DC04/07 CLUTCH TYPE

DCO4 BRUSH ROLL NONE CLUTCH (ONLY AS ONE BELT) FITS DC04/07/14

DCO4/7/14 INTERNAL HOSE